Roman Stucco Cast premixed render

Roman Stucco Cast, for pouring into moulds on a bench, it can typically be de-moulded after 20 minutes

Completely natural Binder, nothing added or removed in manufacturing 
Fast setting typically 40min at 15°C 
Low shrinkage 
Excellent bond strength 
Resistant to acids and alkalis  
Render mouldings - In-situ or run work
Good vapour exchange (breathability)
Application guidance

Application: onto clean and dry background, not water proofed. Repoint masonry as required with the correct mortar. Adequately dampen dry or high suction surfaces beforehand, for best adhesion apply a slurry of neat natural cement and water prior to application.

Each coat must be applied to the previous once while the previous is still damp working "fresh on fresh". Typically leave no more than 2 hours between coats.

Mixing 

Mix in drum mixers or by mixing whisk. Carefully add clean water, between 4.5-5 litres per 25kg bag and mix for approximately 5min. Prompt mortar will rapidly set, typically within 30 - 50 mins, depending on temperature. Do not use in temperatures less than 5 ºC or over 30ºC.

Please note these are not stock items and have to be ordered from the factory, which may incur a 10-14 day lead time